Zennio Accesories
Bus KNX to IR
Zoning control
KEM, KES Plus & KES accessory
KNX interface for Consumption Meters
FAN-COIL Controller for up to Two 2-Pipe or 4-Pipe Units with 0-10VDC Fan Speed Control Signal
4-channel constant current dimmer for DC LED loads
3-channel constant current dimmer for DC LED loads
AC/DC Shutter adaptor for one channel
AC/DC Shutter adaptor for up to two channels
Square temperature probe (accessory)
Fan-coil controller for a 2-Pipe or 4-Pipe fan coil with 0-10DC valves and up to 4 fan speeds.
Zoning ducted Air-Conditioning actuator for up to 4 zones
Zoning ducted Air-Conditioning actuator for up to 6 zones
Input module with 8 analog-digital inputs for DIN-rail (2 units)
Heating actuator for up to 4 outputs 24 VAC/DC
Heating actuator for up to 8 outputs 24 VAC/DC
Universal dimming actuator (RLC, LED, CFL) for DIN-rail
This is an optional accessory for Square TMD and Square TMD Display products, which allows to flush-mount these products in Dry-Wall. Polycarbonate frame of the product should be removed according with instructions. The internal temperature probe should not be used, since a right measurement when flush-mounted cannot be guaranteed. Accessory of the references: ZVI-SQTMDD, ZVI-SQTMD1, []
This is an optional accessory for Z41 and TMD family, which allows to flush-mount these products in Dry-Wall. Polycarbonate frame of the product should be removed according with instructions. Not compatible with aluminium, chromed or golden frame. The internal temperature probe should not be used, since a right measurement when flush-mounted cannot be guaranteed. Accessory []
Not available in the countries of the European Economic Area (Germany, Austria, Belgium, Bulgaria, Cyprus, Croatia, Denmark, Slovakia, Slovenia, Spain, Estonia, Finland, France, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Czech Republic, Romania, Sweden, Iceland, Liechtenstein, and Norway), due to the enforcement, since August 1st, 2025, of the RED directive on []
Not available in the countries of the European Economic Area (Germany, Austria, Belgium, Bulgaria, Cyprus, Croatia, Denmark, Slovakia, Slovenia, Spain, Estonia, Finland, France, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Czech Republic, Romania, Sweden, Iceland, Liechtenstein, and Norway), due to the enforcement, since August 1st, 2025, of the RED directive on []
ZVP-BPLA1 1module (must be together with ZVP-CB1M) ZVP-BPLA2 2 modules (must be together with ZVP-CB2M) ZVP-BPLA3 3 modules (must be together with ZVP-CB3M) ZVP-BP2W2H 2(w) x 2(h) modules (must be together with ZVP-CB2M) ZVP-BP2W3H 2(w) x 3(h) modules (must be together with ZVP-CB3M) ZVP-BP3W3H 3(w) x 3(h) modules (must be together with ZVP-CB3M)
Universal dimmer for flush mounting. One channel x 250 W
KNX Electrical energy meter
Cable for KNX Installations
KNX-Fujitsu / General / Hiyasu / Fuji Electric Gateway
KNX-Toshiba Gateway
KNX audio system
Power supply for Video Intercom 12VDC/2A
KES Plus accessory
KNX-LG Gateway
KNX USB Interface
Door or window surface-mounted magnetic contact. Large
Universal dimming actuator (RLC, LED, CFL) for DIN-rail
Ceiling fan controller for fan units powered at 230 VAC
Ceiling fan controller for fan units powered at 110 VAC
Door or window surface-mounted magnetic contact. Small
Universal dimming actuator (RLC, LED, CFL) for DIN rail. 1 channel x 350 W
Bus KNX to Daikin Residential
KNX Line Coupler
KNX-IP Router
KNX-Panasonic Gateway
Color capacitive touch panel with 7 display.
10K NTC probe for custom inputs – Mini size
Power supply for access control 24 VDC/0,75 A
KNX presence detector with luminosity and temperature sensors for ceiling mounting
Capacitive touch panel with display
KNX-Mitsubishi Electric Ecodan Gateway (IT connector)
KNX TP/RF Media Coupler
DIN rail universal dimming actuator (RLC, LED, CFL)
Fan coil Controller for 2/4-Pipe Units with 2 16A C-load general purpose outputs and 6 binary/analog inputs
Motion detector with luminosity sensor for ceiling mounting
KNX Energy Monitor
KEM accessory
KEM accessory
Schuko socket 16 A / 250 V ~ (55 x 55 mm)
French socket 16 A / 250 V ~ (55 x 55 mm)
Single one-way rocker switch 10 A(X) / 250 V ~ (55 x 55 mm)
Double one-way rocker switch 10 A (X) / 250 V ~ (55 x 55 mm)
KNX-Daikin Industrial Gateway
Capacitive touch panel with a 4.1” display
KNX-Daikin Altherma gateway
Magnetic contact for flush mounting in iron/steel door or window.
It must be together with ZVP-CB2M.
For ZS55 switches and sockets, Flat 55 and Tecla 55
KNX Universal power supply 160 mA with additional output (Max. 250 mA)
Cable outlet (55 x 55 mm)
Blind cover (55 x 55 mm)
KNX Humidity and Temperature sensor for flush mounting
KNX TP-RF Media Coupler (868 MHz)
KES Plus accessory
Samsung-KNX gateway (VRF and Industrial range)
Multifunction device with power supply, KNX-IP Interface, 4 outputs, 6 inputs and logical module
KNX motion detector for flush mounted in wall
Access Control
Encrypted relay for secured door opening (Access control)
Single RJ45 outlet (55 x 55 mm)
TV-R aerial socket (55 x 55mm)
HDMI outlet (55 x 55 mm)
3.5 mm jack audio outlet (55 x 55 mm)
RCA audio outlet (55 x 55 mm)
Not available in the countries of the European Economic Area (Germany, Austria, Belgium, Bulgaria, Cyprus, Croatia, Denmark, Slovakia, Slovenia, Spain, Estonia, Finland, France, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Czech Republic, Romania, Sweden, Iceland, Liechtenstein, and Norway), due to the enforcement, since August 1st, 2025, of the RED directive on []
DIN rail universal dimming actuator (RLC, LED, CFL)
Flat temperature probe (accessory)
Multifunction actuator with 1 0-10 V input/output analog channel
Multifunction actuator with 3 0-10 V input/output analog channels
Multifunction actuator with 2 0-10 V input/output analog channels
KNX RF motion detector for ceiling mounting (868 MHz)
Double RJ45 outlet (55 x 55 mm)
Single two-way rocker switch 10 A(X) / 250 V ~ (55 x 55 mm)
Single intermediate rocker switch 10 A(X) / 250 V ~ (55 x 55 mm)
Double two-way rocker switch 10 A (X) / 250 V ~ (55 x 55 mm)
Double push button switch 10 A (X) / 250 V ~ (55 x 55 mm)
Capacitive touch panel with display (55 x 55 mm)
Parts for converting a basic unit from nickel to black
Magnetic contact for flush mounting in aluminum, wooden or PVC door or window
Available in two different colours: ZVP-ACBLB: Nickel ZVP-ACBLBB: Black
KNX Multifunction actuator with 24 outputs for DIN-rail
Capacitive touch panel (2.8 display) for 70×70 frames
70 x 70 frames for ZS70 sockets
Capacitive touch panel with display and humidity probe
Customisable backlit capacitive touch switches in the Flat family with proximity sensor and flat design (9 mm) in XL format
Multifunction actuator with 2 outputs (16 A) with KNX Secure
Multifunction actuator for flush mounting with 2 outputs (16 A C-Load) and 4 analog-digital inputs
Multifunction actuator for flush mounting with 2 outputs (16 A C-Load)
A/C Unit control device
KNX-IP Interface with KNX Secure
Accesory USB cable for Z41
In-Wall Access Controller for Outdoors installation with Keypad
Color capacitive touch panel with 5 display.
Color capacitive touch panel with 10 display.
Heating actuator for up to 8 outputs 230 VAC and 8 inputs
Heating actuator for up to 4 outputs 230 VAC and 4 inputs
Surface installation accessory for EyeZen motion detectors
In-Wall Access Controller for outdoors installation with KNX Secure
White 6.8 K NTC probe – Mini size
KNX Universal power supply 640 mA with additional output
KNX Universal power supply 320 mA with additional output
KNX motion detector with luminosity sensor for ceiling mounting
KNX-DALI Interface for up to 64 ballasts per channel 1 channel
16 A / 250 V ~ Euro-American socket (55 x 55 mm)
16 A / 250 V ~ Euro-American socket with USB C (55 x 55 mm)
16 A / 250 V ~ Euro-American socket with USB C + A (55×55 mm)
KNX Multifunction actuator with KNX Secure 12 outputs 16 A
KNX-Mitsubishi Electric Gateway (IT connector)
Heating actuator for up to 6 outputs 230 VAC and 6 inputs
Heating actuator for up to 2 outputs 230 VAC and 2 inputs
KNX-DALI Broadcast Interface for up to 4 channels with up to 64 ballasts each
KNX-DALI Broadcast Interface for up to 6 channels with up to 64 ballasts each
4-channel constant voltage PWM dimmer in DIN rail for DC LED loads.
KNX multifunction actuator with KNX Secure 8 outputs 16 A
KNX multifunction actuator with KNX Secure 16 outputs 16 A
KNX multifunction actuator with KNX Secure 4 outputs 16 A
Shutter actuator with KNX Secure 4 channels
Shutter actuator with KNX Secure 8 channels
KNX Multifunction actuator with KNX Secure 20 outputs 16 A
4-channel constant voltage PWM dimmer for DC LED loads
3-channel constant voltage PWM dimmer for DC LED loads
2-channel constant voltage PWM dimmer for DC LED loads
Fan coil controller for 2/4-pipe unit with 2 16A C-load outputs and 6 a/d inputs with KNX Secure
KNX multifunction actuator with KNX Secure 2 outputs 16 A / 5 inputs A/D
KNX multifunction actuator with KNX Secure 4 outputs 16 A / 5 inputs A/D
KNX multifunction actuator with KNX Secure 6 outputs 16 A / 6 inputs A/D
Not available in the countries of the European Economic Area (Germany, Austria, Belgium, Bulgaria, Cyprus, Croatia, Denmark, Slovakia, Slovenia, Spain, Estonia, Finland, France, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Czech Republic, Romania, Sweden, Iceland, Liechtenstein, and Norway), due to the enforcement, since August 1st, 2025, of the RED directive on []
Comb busbar for Zennio’s actuators outputs.
Loudspeaker 4 8 Ohms for AudioInRoom
Loudspeaker 6.5 8 Ohms for AudioInRoom
Double USB C+A Charger 5 V / 3.5 A (55 x 55 mm)
KNX-IP Interface with KNX Secure
KNX multifunction actuator with KNX Secure 8 outputs 16 A / 8 inputs A/D
Industrial actuator with 4 outputs (20 A 200 µF), mechanical manual operation and KNX Secure
KNX-DALI Interface for flush mounting for up to 16 ballasts and 16 groups 1 channel
KNX-DALI Interface for up to 64 ballasts per channel 2 channels
Glass capacitive push button 70 x 70 1/2/4/6 buttons
ZS55. Simple Soft push button for 1 binary input 55 x 55 mm
ZS55. Simple Soft push button for 2 binary inputs 55 x 55 mm
ZS55. Double Soft push button for 2 binary inputs 55 x 55 mm
ZS55. Double Soft push button for 4 binary inputs 55 x 55 mm
Universal Interface 2 binary inputs/LED outputs and 1 temperature sensor input.
Universal Interface 4 binary inputs/LED outputs and 1 temperature sensor input.
Universal Interface 6 binary inputs/LED outputs and 1 temperature sensor input.
Universal Interface 8 binary inputs/LED outputs and 1 temperature sensor input.
This is an optional accessory for Z50, which allows to flush-mount these products in Dry-Wall. Polycarbonate frame of the product should be removed according with instructions. The internal temperature probe should not be used, since a right measurement when flush-mounted cannot be guaranteed. Accessory of the references : ZVIZ50
Schuko socket 16 A / 250 V ~ with UCB C (55 x 55 mm)
Schuko socket 16 A / 250 V ~ with UCB C + A (55 x 55 mm)
French socket 16 A / 250 V ~ with USB C (55 x 55 mm)
French socket 16 A / 250 V ~ with USB C + A (55 x 55 mm)
This is an optional accessory for Z35v2, which allows to flush-mount these products in Dry-Wall. Polycarbonate frame of the product should be removed according with instructions. The internal temperature probe should not be used, since a right measurement when flush-mounted cannot be guaranteed. Accessory of the references : ZVIZ35V2
This is an optional accessory for Flatv2 and IWACDisplay, which allows to flush-mount these products in Dry-Wall. Polycarbonate frame of the product should be removed according with instructions. The internal temperature probe should not be used, since a right measurement when flush-mounted cannot be guaranteed. Accessory of the references : ZVIF1/2/4/6V2 and ZVIIWACDV3
This is an optional accessory for Tecla, which allows to flush-mount these products in Dry-Wall. Polycarbonate frame of the product should be removed according with instructions. The internal temperature probe should not be used, since a right measurement when flush-mounted cannot be guaranteed. Accessory of the references : ZVIT1/2/4/6/8
KNX-Fujitsu / General / Hiyasu / Fuji Electric Gateway
Industrial actuator with 4 outputs (20 A 200 µF), current measurement and KNX Secure
4-Channel Shutter Actuator with automatic travel time measurement and KNX Secure
KNX RF magnetic contact for door/window (868 MHz)
Power supply for AudioInRoom + Access control 24 VDC/2.5 A
Capacitive touch panel with a 3.5” display and humidity probe
KNX presence detector with luminosity, temperature, humidity, and CO2 sensors for ceiling mounting.
2-Channel Shutter Actuator with automatic travel time measurement and KNX Secure.
6-Channel Shutter Actuator with automatic travel time measurement and KNX Secure.
8-Channel Shutter Actuator with automatic travel time measurement and KNX Secure.
Schuko socket 16 A / 250 V ~ with UCB C (70 x 70 mm)
Schuko socket 16 A / 250 V ~ with UCB C + A (70 x 70 mm)
French socket 16 A / 250 V ~ with USB C (70 x 70 mm)
French socket 16 A / 250 V ~ with USB C + A (70 x 70 mm)
KNX multifunction actuator with KNX Secure 12 outputs 16 A / 12 inputs A/D
Multifunction device with power supply, KNX-IP Interface, 8 outputs, 8 inputs and logical module
Device for remote control with Zennio Remote (up to 100 controls)
KNX Soft push button 55×55 mm
Multifunction device with a KNX power supply, KNX-IP interface, 6 inputs and 4 outputs to control a 2-pipe fan coil plus one additional 16 A C-Load output.
Multifunction device with power supply, KNX-IP Interface, 4 outputs, 6 inputs and logical module
Multifunction device with power supply, KNX-IP Interface, 16 outputs, 12 inputs and logical module
Input module with 4 analog-digital inputs with KNX Secure
KNX Soft push button 70×70 mm
ZS70. Simple Soft push button for 1 binary input 70 x 70 mm
ZS70. Simple Soft push button for 2 binary inputs 70 x 70 mm
ZS70. Double Soft push button for 2 binary inputs 70 x 70 mm
ZS70. Double Soft push button for 4 binary inputs 70 x 70 mm
4-channel actuator with 1-10 V analog output outputs for the control of dimmable lighting drivers
RGB backlit capacitive touch switch (55 x 55 mm)
RGB backlit capacitive touch switch
RGB backlit capacitive touch switch
RGB backlit capacitive touch switch (55 x 55 mm)
RGB Backlit capacitive touch switch
RGB glass capacitive push button 70 x 70 1/2/4/6 buttons
PC-ABS Capacitive RGB backlit push button 70 x 70 1/2/4/6 buttons
Industrial actuator with 2 outputs (20 A 200 µF), mechanical manual operation and KNX Secure
Industrial actuator with 2 outputs (20 A 200 µF), current measurement and KNX Secure
Industrial actuator with 8 outputs (20 A 200 µF), mechanical manual operation and KNX Secure
Industrial actuator with 8 outputs (20 A 200 µF), current measurement and KNX Secure
Industrial actuator with 12 outputs (20 A 200 µF), mechanical manual operation and KNX Secure
Industrial actuator with 12 outputs (20 A 200 µF), current measurement and KNX Secure
KNX Universal power supply 960 mA with additional output
KNX Universal power supply 1280 mA with additional output
Capacitive touch panel 5
Fan coil controller for 2/4-pipe units with 0–10 VDC control of fan and/or valves
Capacitive touch panel with round display (70 x 70 mm)
KNX Doorbell 4 doorbells and 8 tones
KNX multifunction actuator with KNX Secure 1 output 16A / 2 inputs A/D
KNX multifunction actuator with KNX Secure 2 output 16 A / 2 inputs A/D
Input module with 4 analog-digital inputs for DIN-rail (1 unit) and KNX Secure
Input module with 6 analog-digital inputs for DIN-rail (1 unit) and KNX Secure
Input module with 12 analog-digital inputs for DIN-rail (2 units) and KNX Secure
Input module with 8 analog-digital inputs for DIN-rail (2 units) and KNX Secure
Device for remote control with Zennio Remote (up to 100 controls) with KNX IP interface
True CO₂ sensor with photoacoustic NDIR technology USB-C
Capacitive touch panel 4
+370 686 501 85